Primesol & Ergo System is leading storage silo manufacturers in Oman, suppliers and exporters in Oman. Industrial storage system, specially designed for safe and orderly storage of bulk quantities of powders, granules, liquids, chemicals, grains, cement and other raw materials. Super premium-grade stainless steel and other high quality materials are used to produce these silos, which are corrosion resistant, hygienic and durable for long service.
These silos are designed to promote the easy flow of material, loading, unloading, and compatibility with automated material handling systems. We are widely manufacturing Storage Silos from decade for the industries like agriculture, food processing, pharmaceuticals, cement, plastics, chemicals, and dairy product manufacturing.
Storage Silo is a large industrial structure used for storing bulk materials such as cement, grains, powders, chemicals, and other raw materials safely and efficiently. It helps industries maintain organized storage while protecting materials from moisture, contamination, and environmental damage. Storage Silos are widely used in industries like agriculture, construction, food processing, and manufacturing for bulk material management.
Being as reputed storage silo suppliers in Oman, packed to the hilt and wasted to the barest extent, ready for simple incorporation into your manufacturing process. Precision in maintaining inventory, responsiveness to the environment, and business continuity are imperatives in an age of competition. We are extremely durable and adaptable storage systems, such as its revolutionary silos, are designed to counteract these problems.
The Silo Storage System should be employed since it is more weather-resistant, has increased storage capacity within a restricted space, and
A facility to accept computer-automated material-handling systems, all of which result in increased efficiency and reduced expenses.
We also specialize in regional solutions as a trusted Storage Silo Manufacturer in Oman, delivering quick installation and maintenance services across Maharashtra.
Being as notable storage silo manufacturers in Oman, different types are there as per storage requirement which is given below.
Primesol exports high-quality Storage Silos to industries across Oman from its advanced manufacturing facilities in India. Businesses seeking reliable storage solutions across diverse industrial sectors can also explore our Storage Silo Manufacturers in India page for detailed product specifications, customization options and application insights. Our silos are often integrated with screw conveyors to ensure efficient bulk material handling and seamless discharge flow.
We have added below a technical sheet, as we are storage silo in Oman that provides more technical information such as:
| Specification Category | Short Advanced Technical Detail |
|---|---|
| Silo Type | Flat, Conical, Mass Flow, Funnel Flow, Multi-Compartment; Bolted/Welded. |
| Material Chars. | Bulk density, Flowability (cohesiveness, stickiness), Abrasiveness, Temp, Explosibility (Kst, Pmax). |
| Capacity & Dims. | 10 T to 12,000 T+; Dia: 2-50m+; Height: 5-60m+. |
| Materials | Carbon Steel (MS), Stainless Steel (SS), Aluminum, FRP, Reinforced Concrete (RCC). |
| Structural Design | EN 1991-4, ACI 313, ASCE/SEI 7; FEA for loads (static, dynamic, wind, seismic, thermal). |
| Discharge System | Gravity, Vibrating activators, Fluidizing, Screw feeders, Rotary valves, Slide gates. |
| Filling System | Pneumatic conveying, Belt conveyors, Bucket elevators, Screw conveyors. |
| Instrumentation | Level (Radar, Load Cells), Pressure, Temp monitoring; High/low alarms, explosion protection. |
| Specification Category | Short Advanced Technical Detail |
|---|---|
| Silo Type | Corrugated Steel (Bolted - flat/hopper bottom), Concrete (RCC), Square. |
| Grain Chars. | Bulk Density (e.g., Wheat: 750-800 kg/m³), Moisture Content (e.g., 12-14%), Flowability, Pest susceptibility. |
| Capacity & Dims. | 50 MT to 25,000 MT+; Dia: 3-36m+; Height: 10-40m+. |
| Structural Design | IS 4995, IS 875, ASCE/SEI 7; Janssen/Airy theories; Wind/Seismic loads (IS 1893). |
| Aeration System | Fans (0.05-0.3 CFM/bushel), Perforated floors/ducts, Auto control. |
| Temp Monitoring | Multi-sensor temperature cables (e.g., every 1.5-3m). |
| Fumigation System | Recirculation fans/ducts, Gas-tight design, Fumigation ports. |
| Filling/Discharge | Belt/Bucket elevators; Sweep augers (flat bottom); Gravity discharge (hopper); Rotary valves. |
| Corrosion Protection | Heavy galvanization (e.g., Z275, Z350 per IS 2779), internal linings (optional). |
| Automation | SCADA/PLC, Inventory management, Remote monitoring. |
| Specification Category | Short Advanced Technical Detail |
|---|---|
| Primary MOC | Stainless Steel (SS 304/304L, 316/316L, Duplex); for hygiene/corrosion/purity. |
| Application Suitability | Food & Bev, Pharma, Cosmetics, Fine Chemicals, Dairy, where hygiene/purity is critical. |
| Surface Finish | Internal: Ra 0.8-1.6 µm (standard), Ra 0.4-0.6 µm (hygienic), electropolished (critical). |
| Welding/Fabrication | Full penetration welds, Argon purging, Post-weld passivation/pickling. |
| Structural Design | ACI, EN, ASME BPE; cgmp compliance. |
| Discharge System | Mass flow design crucial; Hygienic feeders/valves; no dead zones. |
| CIP/SIP Comp. | Spray balls, drainability, hygienic gaskets (FDA-approved). |
| Traceability | Full Material Certificates (mtcs), weld logs, surface finish reports, IQ/OQ/PQ. |
| Specification Category | Short Advanced Technical Detail |
|---|---|
| Primary MOC | Mild Steel (MS) / Carbon Steel (CS) - economical (e.g., IS 2062). |
| Application Suitability | Non-corrosive, dry, granular/powdered materials (cement, grain, coal, sand). |
| Corrosion Protection | External: Paint (multi-coat epoxy), Hot-dip galvanization (e.g., IS 4759). Internal: Optional liners. |
| Abrasive Resistance | Standard MS; AR steel liners or hard-facing for high wear areas. |
| Temperature Range | -20°C to 400°C; insulation/lining for hotter materials. |
| Structural Design | IS 4995, IS 800, IS 875 (wind/seismic - IS 1893); FEA for stress. |
| Fabrication | Easily welded/formed; shop-welded/bolted/site-welded. |
| Flow Promotion | Hopper angle design, Vibrating activators, Aeration systems (for fine powders). |
| Instrumentation | Level sensors, Pressure/Vacuum relief valves, Explosion protection (vents - NFPA 68), Safety access. |
| Specification Category | Short Advanced Technical Detail |
|---|---|
| Silo Type | Vertical (conical/mass flow), Horizontal; Welded (leak-tight) or Bolted (modular). |
| MOC | SS (304/316/Duplex for corrosion/purity); CS with specialized internal linings (epoxy, PTFE, FRP); FRP for high corrosives. |
| Chemical Chars. | Corrosivity, Flammability/Toxicity/Reactivity (HAZMAT), Bulk Density, Flowability, Temp. |
| Capacity & Dims. | 5-500 MT+ (solids); Thousands of liters (liquids); customized size. |
| Structural Design | ASME Sec VIII, API 650/620, EN 1991-4, NFPA; FEA for complex loads/pressures. |
| Internal Finish/Lining | Ra values/electropolish (SS); Chemical-resistant coatings (CS). |
| Sealing/Containment | Airtight welds, High-performance seals, Secondary containment (bunding), Double-wall (optional). |
| Discharge Aids | Mass flow hoppers, Vibrating activators, Fluidizing, SS/Explosion-proof feeders; Inert gas blanketing. |
| Filling System | Pneumatic/Vacuum conveying, dedicated fill lines, overfill protection. |
| Instrumentation | Hygienic level/pressure sensors, pvrvs with flame arrestors, Gas/Vapor detection, Explosion protection (vents, suppression), ESD. |
As storage silo suppliers in Oman, different benefits are there which as per requirement given below.
Our Storage Silos are designed and manufactured at our Pune production facility using advanced engineering practices and strict quality control standards. Learn more about our manufacturing expertise and infrastructure on our Storage Silo Manufacturers in Pune page.
Serve as notable storage silo exporters in Oman, it is applicable in different industries and sectors which is given below.
As Primesol & Ergo System is well-known storage silo manufacturers in Oman, suppliers and exporters of storage silo in Oman used for the mass storage of powder or granular substance. Storage silo exporters in Oman are constructed to safeguard material in storage from climatic forces in such a way that it can sustain quality and supply free material flow for industry processes. Its structure offers space economy, minimized loss of products, and increased operating safety in industries. It functions on the principle that it provides means for releasing material from the top and for releasing from the bottom, typically through gravity or supporting conveying equipment. Contact us for more details.